Plex Has Been Ported to Jailbroken Apple TV 2G !

The popular media center client for Mac OS X and iOS devices has been successfully ported to the new Apple TV 2G ! So for those of you who have a Plex server running in your home, you can now “technically” stream media from Plex server on to your jailbroken 2nd-generationApple TV.

Installation instructions, as posted on the Plex Forums are as follows. Make sure you have jailbroken your Apple TV 2G on iOS 4.1 with PwnageTool (instructions here) before proceeding with the instructions below.

Prepare the Media Server 

Before you install the actual plugin you need to prepare the Plex Media Server (it needed some tweaks before it would talk to the ATV). Since those changes are considered ‘beta’, you need to tell your PMS to download beta plug-ins, by enetering the following URL in a Safari running on the same machine as the media server: http://localhost:324…s/set?AS_BETA=1 

After that start Plex and check for updates in the PlexOnline section.

Enable a higher Quality (optional) 

This part is optional, but if you feel like experimenting a lot, you might want to install a testing built of ffmpeg, that enables higher bitrates for the (currently) highest available quality (which is the only quality your ATV will use). This will also increase the image quality on other iOS devices, however you will need a potent Mac for the encoding! So If you still feel like installing use the following two commands in a Terminal on the Mac running your Media Server:

curl http://ambertation.de/downloads/PLEX/ffmpeg > ~/Downloads 

/ffmpeg 

cp ~/Downloads/ffmpeg ~/Library/Application\ Support/Plex/Plex 

\ Media\ Server.app/Contents/Resources/

If you not use this, the plugin will still work, but the image-quality might not be on par with what you expect.

Install the Plugin 

First off: you need to Jailbreak your Apple TV. I suggest you use the Pawnage method. For the sake of the following instruction I assume thet the IP-Address of your ATV is 169.10.11.12, and that you can log in using ssh.

• Start your ATV and log in to your ATV using ssh
  ssh root@169.10.11.12
  It will ask you for your password, which (if you did not change the default) is alpine. (I strongly suggest you change the password using the passwd command!!!)
• In that ssh session, you need to add new cydia sources using
  
  
  echo "deb http://apt.awkwardtv.org ./" > /etc/apt 
  /sources.list.d/awkwardtv.list 
  echo "deb http://www.ambertation.de ./downloads 
  /PLEX/" > /etc/apt/sources.list.d/plex.list
• Now update your cydia database using
  apt-get update
• Install the plugins (and its dependencies like beigelist by DHowett) with
  apt-get install plex-client-plugin
• Restart the GUI and hope that it comes back
  killall Lowtide
  If the UI does not come up again, you probably have to restore your ATV!

That is it. You should see the PLEX menu item now. If you experience any problems (which you almost certainly will  ) just report back here. But remember the ATV is just a hobby 

Updating the Plugin 

Once in a while I might release an updated version for the plugin, so once in a while you might want to check for updates and install them. Here is how that will work:

• Start your ATV and log in to your ATV using ssh
  ssh root@169.10.11.12
• In that ssh session enter
  
  
  apt-get update 
  apt-get upgrade

 You can follow me on Twitter to keep yourself updated on all the latest iPhone jailbreaking and unlocking releases.

[via: redmondpie]

Print PDF